Friday, October 17, 2008

Number Of VRF Supported


Click Here To Read Rest Of The Post...

Nat Issues with ip virtual-reassembly

I got a question from one of my manager what are the pros and cons of ip virtual-reassembly.

Answer from of the blog I got

IOS throws that on automatically. Here’s what it does:

A buffer overflow attack can occur when an attacker continuously sends a large number of incomplete IP fragments, causing the firewall to lose time and memory while trying to reassemble the fake packets.

The max-reassemblies number option and the max-fragments number option allow you to configure maximum threshold values to avoid a buffer overflow attack and to control memory usage.

In addition to configuring the maximum threshold values, each IP datagram is associated with a managed timer. If the IP datagram does not receive all of the fragments within the specified time (which can be configured via the timeout seconds option), the timer will expire and the IP datagram (and all of its fragments) will be dropped.

Here’s why it does it:

VFR is designed to work with any feature that requires fragment reassembly (such as Cisco IOS Firewall and NAT). Currently, NAT enables and disables VFR internally; that is, when NAT is enabled on an interface, VFR is automatically enabled on that interface.
Click Here To Read Rest Of The Post...

Tuesday, October 14, 2008

Communiaction between two different subnets

One of my friend asked a question that can we a communication be possible in point to point link with different subnet ip addresses. I replied him at the same instant yes by adding static route in it and it works fine. But what happens if OSPF or ISIS is used. Under OSPF the neighborship comes up because OSPF neighborship made on the basics of multicast address not on ip address. In case of IS-IS it works on the basics of network Id not on ip addresses.
This can really a good experience becasue in network some one can make this type of mistake and you won't be able to troubleshoot because everthing works fine in it. In the next post I will post the document for this.
Click Here To Read Rest Of The Post...