How to secure lan so that any rougue laptop/pc donot get the ip address fom the dhcp, a big question mark, but possible in wireless media but what about wired media. Same question was asked to me few days back and my instant response was dhcp did not support authentication. But I replied we can use the dot 1x for the wired media.
So i started out my testing lab with one of my colleague and installed domain controller with radius. We use the dot1x mechanism to authenticate the pc/laptops; After 2 days testing we got the positive results.
Advantages
1. Get rid form the man in middle attack.
2. Dictionary attacks can be stopped with this.
3. Security of Lan; No one will get the ip address until and unless he/she is having domain username & password.
I am writing document on this, If someone need on urgent basics kindly mail me.
Click Here To Read Rest Of The Post...
SDN and NFV is the next phase of technology change which will help service provider to launch the services in single click. This is all about the programmability of the networks by using open source software defined network controller.
Wednesday, October 22, 2008
DHCP Authentication With Dot1x
Friday, October 17, 2008
Nat Issues with ip virtual-reassembly
I got a question from one of my manager what are the pros and cons of ip virtual-reassembly.
Answer from of the blog I got
IOS throws that on automatically. Here’s what it does:
A buffer overflow attack can occur when an attacker continuously sends a large number of incomplete IP fragments, causing the firewall to lose time and memory while trying to reassemble the fake packets.
The max-reassemblies number option and the max-fragments number option allow you to configure maximum threshold values to avoid a buffer overflow attack and to control memory usage.
In addition to configuring the maximum threshold values, each IP datagram is associated with a managed timer. If the IP datagram does not receive all of the fragments within the specified time (which can be configured via the timeout seconds option), the timer will expire and the IP datagram (and all of its fragments) will be dropped.
Here’s why it does it:
VFR is designed to work with any feature that requires fragment reassembly (such as Cisco IOS Firewall and NAT). Currently, NAT enables and disables VFR internally; that is, when NAT is enabled on an interface, VFR is automatically enabled on that interface.
Click Here To Read Rest Of The Post...
Subscribe to:
Posts (Atom)
