Tuesday, November 4, 2008

CEF LoadbalancingProblem



Sometimes you may face the problem in which if you ping from R7 to R6 it works perfect but when you try to ping from R5 to R6 you may face drops. Whats the reason for that ? Do you know ?
Needn’t worry about that I will let you know the reason behind this. Actually what happens when you ping from R7 the packets are process switched and then from R5 they are CEF switched because of cef switched by default it takes per destination based. So your packets always path either R5-R3 or R5-R1. Lets assume packets takes R5-R3 path and R5-R1 paths has some CRC errors etc. So in this case your packets will always follow R5-R3 path never R5-R1 and you find no more drops. But in latter case when you ping from R5 to R6, you always find drops because packets originated from R5 always process switched, so packets are always load balanced across both paths and you may drops becasue of this.
You can check with the help of " show ip cef exact-route " command which will tell you which path is being taken by the packets.

Click Here To Download
Click Here To Read Rest Of The Post...

Friday, October 24, 2008

What happen if all SFC removed from GSR

During reading a article on GSR; I was stumbled when come to know that GSR can also work without SFC(Switch Fabric Card). Actually what happens when the SFC removed from the GSR Clock Schedular Card(CSC) comes into the picture. At that time all the line engines will stop work except line engine 0. So your CSC will work as SFC.
what i think that at that time all line engines are stopped and there is no need for the clock thats why clock card(CSC) falls back to SFC card mode. It means GSR can be upgraded without shutting it down.


regards
shivlu
Click Here To Read Rest Of The Post...

Wednesday, October 22, 2008

DHCP Authentication With Dot1x

How to secure lan so that any rougue laptop/pc donot get the ip address fom the dhcp, a big question mark, but possible in wireless media but what about wired media. Same question was asked to me few days back and my instant response was dhcp did not support authentication. But I replied we can use the dot 1x for the wired media.
So i started out my testing lab with one of my colleague and installed domain controller with radius. We use the dot1x mechanism to authenticate the pc/laptops; After 2 days testing we got the positive results.

Advantages
1. Get rid form the man in middle attack.
2. Dictionary attacks can be stopped with this.
3. Security of Lan; No one will get the ip address until and unless he/she is having domain username & password.

I am writing document on this, If someone need on urgent basics kindly mail me.
Click Here To Read Rest Of The Post...