From one of the discussion hritter from cisco cleared a good point regarding the deployment of ayncast rp and ssm with cisco and juniper. If you are having juniper boxes as well as cisco boxes and you are planning to deploy SSM solution in the core then it won't work with juniper because juniper IOS only supports data mdt not default mdt. But for basic deploment of MVPN data mdt is mandatory. So if the juniper IOS is not going to support then you require some protocol which can help to converge your mdt tunnel. For that you have to deploy anycast rp which will be responsible for the convergence of default mdt and then you can deploy SSM for your data mdt.
Really a awesome solution.
regards
shivlu jain
SDN and NFV is the next phase of technology change which will help service provider to launch the services in single click. This is all about the programmability of the networks by using open source software defined network controller.
Wednesday, January 28, 2009
Cisco and Juniper SSM Deployment with Anycast RP
Subscribe to:
Post Comments (Atom)
1 comment:
This is not very clear. Can you elaborate on this?
Post a Comment