Today I am going to tell about wild card mask which is also known as WCM. WCM refers to what needs to be permit and denied. Its all about 0's & 1's. Remeber one logic which cleary states that 0 means match the same and 1 means donot care. What it exactly means if you are adding 0 in your WCM entry it means corresponding to that octet in network address will be matched and if you are using 1 then corresponding to that octet in network address will be permit. Simpley we can say it is like mirroring which which check corresponding to its bits in the octet and take the decision on the basics of 0's and 1's.
Let's clear it with the help of an example:-
We need to permit the all host in network 192.168.1.0/24. For this we need to create an acl and wcm will be used here. It means we want first three octets i.e 192,168 & 1 remains the same and only last octet will be allowed to change. It means last octet can contains value starting from 0 to 255. Now create wcm for this
00000000.00000000.00000000.11111111
1st octet in wcm is having all zero, it will check its image in mirror and find 192 and it is not allowed to change,same is used for 2nd and 3rd octet. In the last octet all 1's are used and it will not check its image in mirror because everything is allowed in it. So at last you will be permitting 192.168.1.0,2,3,4,5.......and so on.
regards
shivlu jain
Click Here To Read Rest Of The Post...
SDN and NFV is the next phase of technology change which will help service provider to launch the services in single click. This is all about the programmability of the networks by using open source software defined network controller.
Tuesday, November 18, 2008
Monday, November 17, 2008
What will happen if loopbacks are not used for MPLS enviornment

Have you ever think of that what will happen if you are not going to use loopbacks in your MPLS enviorment. The same has been tested in test lab and you will be stumbled across to see the results. Prior reading to this article kindly have a look on PHP first.
LER-1#sh mpls ldp bindings 10.1.1.8 30 detail
tib entry: 10.1.1.0/30, rev 6
local binding: tag: 17
Advertised to:
10.1.1.2:0
remote binding: tsr: 10.1.1.2:0, tag: 16
As per LER-1 output tag 16 is used for forwarding. It means outgoing label is 16 and it will become the incoming label of LSR-1.
LSR-1#sh mpls ldp bindings 10.1.1.8 30 detail
tib entry: 10.1.1.8/30, rev 6
local binding: tag: 16
Advertised to:
10.1.1.1:0 10.1.1.6:0
remote binding: tsr: 10.1.1.6:0, tag: imp-null
remote binding: tsr: 10.1.1.1:0, tag: 17
LSR-1 is getting imp-null from 10.1.1.6. It means IGP tag is removed here and packet will be forwarded with VPN tag only.
In the above output we actually get the reason for not pinging. The reason is Penultimate Hop Popping (PHP). Actually LSR-1 is getting imp-null from LSR-2 because 10.1.1.8/30 is directly attached subnet. Because of PHP LSR-1 is removing IGP label before forwarding to LSR-2. So LSR-2 is receiving the packet with vpn label and it LFIB it is not able to get the label and subsequently packet drops at LSR-2. From figure 1 you can see the PHP is happening twice for 10.1.1.8/30 subnet because it is directly connected to LSR-2 & LER-2.
After creating loopbacks PHP will take place only once and IGP label will be removed by LSR-2 and end to end ping will be achieved.
Download Full Article
regards
shivlu jain
Click Here To Read Rest Of The Post...
Saturday, November 15, 2008
How CPE Area 0 & PE Superbackbone Communicates
All of you are might be aware of super backbone concept in mpls. No issue if you don't know I will let you in couple of words. As per super backbone concept service provider network will work as area 0 for customer links. It means for every vpn which is using OSPF as PE-CE routing protocol no need to configure area 0. Without introducing area 0 all links of the vpn can communicate with each other. This is all about super backbone concept. But what happens if customer will use area 0 in his network. So simply ask customer to extend area 0 till your PE but as per my experience none of the customer will do that. Consequently an immense problem can occur if customer will not extend the area 0 till PE.
Click here to download the full solution.
regards
shivlu jain
Click Here To Read Rest Of The Post...
Subscribe to:
Posts (Atom)